| | used THS/MN Needle Search
textile / industrial Metal Detector | Very high Sensitivity to ferrous and to all magnetic metals | | Best ferrous in foil performances | | Full compliance with HACCP criteria | | 250 product data memories, selectable by local programming, bar code reader or network software | | Completely housed in AISI 316L stainless steel | | High level of electronic and mechanical reliability | | Programmable via local keyboard and display or through external network |
| |
CEIA THS/MN Needle Search Metal Detectors detect ferrous and magnetic metal contaminants accidentally present on textile products, with levels of sensitivity, immunity to interference and response speeds designed to satisfy the strictest Quality Control requirements.
THS/MN Metal Detectors allow interception of little metal pieces, like needles, or other magnetic contaminants in a garment that has been manufactured with or without the inclusion of metallic fastenings such as zips, studs etc.
THS Metal Detectors’ wide bandwidth allows maximum-sensitivity operation at both high and low transit speeds.
The THS Metal Detector electronics unit can either be programmed locally, via a keypad and display of 80 alphanumeric characters, or be controlled from a remote computer via a standard RS232 serial interface, or be linked into a local computer network through a RS485 interface.
The THS Report management software (optional) provides statistical data on the actions carried out by the detector, on the periodic tests and on variations in the parameters, in line with ISO 9001 specifications on traceability data. |
