S Series control panel

The single column materials testing machines have frame capacities of

1 kN or 5 kN (200 lbf or 1,000 lbf) and include two model types — the

S series and the T series. These machines are designed to test a wide

range of materials, including, but not limited to: plastics, films, paper, packaging materials, non-woven fabrics, filter material, felt, leather, adhesives, foils, food, toys, medical products and components etc., in tension, compression, flexure, shear and peel.

S Series

Using a combination of quality engineering and advanced technology,

Equiptex has produced a series of machines that are accurate and

simple to use. All S series machines feature an easy-to-read backlit liquid

crystal display that can be switched The S Series of testers are also

designed for users all over the world — an optional language module can be

plugged into the control panel and all data on the backlit LCD will be shown

in the selected language. Language options include: English, French,

Portuguese, German, Italian, Spanish and Polish.

Common Features

The S series use rapid change Z  beam load cells that allow for simple

and quick “sizing” of the machine to an appropriate capacity for the test. These load cells have an accuracy of +/- 0.5% of the applied load value, from 2% to 100% of the load cell capacity.

The S series has a huge assortment of specimen grips and fixtures allowing the selection of an ideal configuration for your application.

Key Features

·        PC control via high speed

·        RS232 using ASCII mode and super high speed binary mode

·        Machines are proof loaded to 200% of capacity

·        Force accuracy of 0.5% of applied load across the load cell display range

·        Built-in intelligent active force and displacement alarm system

·        32 bit precision motor controller

·        Displacement resolution of 0.0001 mm

·        Speed resolution of 0.001 mm/min

·        150% mechanical overload capacity on each load cell

·        20% digital load tare while maintaining full load cell capacity

·        Automatic motor drive alarms that monitor over/under voltage, current and temperature

Technical Specifications

Specifications:

Load measurement accuracy: +/- 0.5% of applied load from 2% to 100% capacity; extended range down to 1% capacity with accuracy of 1% of applied load Position measurement accuracy: +/- 0.01% of reading or 0.001 mm, whichever is greater Speed accuracy: +/- 0.005% of set speed Operating temperature range: 32 to 100 degrees F (0 to 38 degrees C) Storage temperature range: 14 to 115 degrees F (-10 to 45 degrees C)

Humidity range: 10% to 90% non-condensing, web bulb method

Power: standard optional voltages 220/240VAC, 50-60 Hz, 2000W; power

must be free of spikes and surges exceeding 10% of the nominal voltage

Notes: 1. Load weighing system meets or exceeds the requirements of the following standards: ASTM E4, EN10002-2, BS 1610, DIN 51221, ISO 7500-1.

in accordance with ASTM E4 and ISO 75001.

2. Strain measurement system meets or exceeds the requirements

of the following standards: ASTM E83, EN 10002-4, BS 3846 and ISO 9513.

3. These models conform to all relevant European CE Health and Safety Directives EN 50081-1, 580081-1, 73/23/EEC, EN 61010-1

4. Specifications are subject to change without notice